TL;DR
Get backup power and energy gear delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
Daikin announced iCM Pro on October 30, 2026, a plant-management platform for coordinating chillers, heat pumps and auxiliary equipment. The company says it supports up to 16 units per controller, including compatible equipment from other manufacturers, and adds flow-based sequencing. Pricing, availability and independent performance results were not provided in the source report.
Daikin announced iCM Pro on October 30, 2026, an updated control platform for managing HVAC plants with chillers and heat pumps, including compatible units made by other manufacturers. The platform can coordinate up to 16 units per controller and adds flow-based sequencing, giving building and plant operators another option for controlling mixed-equipment systems, particularly in retrofit projects.
According to Daikin, iCM Pro is offered in four configurations, supporting 4, 8, 12 or 16 chillers and heat pumps. Datapoint management capacities range from 500 to 5,000 datapoints, allowing a project to be sized around both the number of units and the amount of information the system must monitor and manage. The company says its pre-configured software is intended to simplify setup and commissioning.
The platform can manage plants with air-cooled and water-cooled equipment, multifunctional units, and two-pipe or four-pipe systems. Daikin says it supports simultaneous heating and cooling, seasonal changeover, and installations dedicated to heating or cooling. It can also coordinate auxiliary equipment such as pumps, cooling towers and control valves.
Daikin describes the software as a two-level architecture developed by Daikin Applied Europe. A layer of validated Daikin control algorithms is paired with a Niagara-based layer that the company says allows project-specific changes to configurations, operating logic and functionality. The platform monitors factors such as unit availability, alarms, operating priorities, running hours, start frequency and plant thermal demand, then adjusts operation to match load conditions.
Control for Mixed HVAC Plants
The ability to coordinate equipment from multiple manufacturers could matter to owners upgrading existing plants. A retrofit may involve keeping functioning chillers or heat pumps while adding or replacing other units; Daikin says iCM Pro can include compatible third-party equipment in the same control strategy. That may give project teams an alternative to replacing an entire system, although the source does not specify which third-party models are compatible or how compatibility is validated.
The added flow-based sequencing is intended to account for hydraulic demand when deciding how individual units should operate, alongside conventional temperature-based control. This is relevant to variable-flow systems, primary-secondary arrangements, multi-zone buildings and industrial processes with changing loads, according to the report. Daikin says the control strategy aims to improve operational efficiency and reduce unnecessary equipment operation; the report provides no measured energy savings or independent results to quantify those claims.
Products Worth Considering
eufy Security Essential 7-Piece Alarm System
Ring Alarm 8-Piece Kit (2nd Gen) Home Security System
Ring Alarm 14-Piece Wireless Security System
As an affiliate, we earn on qualifying purchases.
From Chiller Manager to iCM Pro
The announcement describes iCM Pro as the latest evolution of Daikin’s intelligent chiller manager platform. Its stated scope extends beyond coordinating chillers: it also covers heat pumps and plant auxiliaries, with capacity options for systems of different sizes and datapoint requirements. That distinction matters because control needs depend not only on how many units are installed, but also on the signals, parameters and other devices being monitored.
The report identifies retrofit work as one setting where support for compatible equipment from other manufacturers may be useful, since a full system replacement can be complex or impractical. It also describes the Niagara-based software layer as a means of adapting the system to individual project requirements while retaining Daikin’s validated control layer. These are features and intended uses described by the company, not independent assessments of performance.
“The platform can integrate and coordinate, within a single control strategy, Daikin equipment as well as compatible chillers and heat pumps from other manufacturers.”
— Daikin, as reported by Cooling Post
Pricing and Performance Details
The source report does not give pricing, order dates, regional availability or installation requirements. It also does not list the third-party equipment models deemed compatible, explain how compatibility testing works, or specify whether particular integrations require additional hardware or software.
Daikin’s stated efficiency aims are not accompanied by independent test results or quantified savings. The report also does not explain how the four unit-capacity options map to the available datapoint capacities, beyond saying that capacities range from 500 to 5,000 datapoints. Those details would help buyers assess fit, cost and expected performance for a specific plant.
Details Buyers Still Need
Building owners, consulting engineers and contractors evaluating the platform will need to confirm local availability, pricing and commissioning arrangements with Daikin or its sales partners. They will also need project-specific confirmation that existing chillers, heat pumps and auxiliary devices are compatible, and that the selected controller configuration can handle the plant’s unit count and datapoint requirements.
The next useful evidence would include a published compatibility list, technical documentation and field or test data showing how the flow-based strategy performs under defined operating conditions. The source report does not announce a release schedule or a future product briefing, so no further milestone is confirmed.
Key Questions
What is Daikin iCM Pro?
iCM Pro is Daikin’s updated platform for controlling HVAC plants. It is designed to coordinate chillers, heat pumps and auxiliary equipment within a plant control strategy.
How many units can one controller manage?
Daikin lists configurations for 4, 8, 12 or 16 chillers and heat pumps per control architecture.
Can iCM Pro control equipment made by other companies?
Daikin says it can coordinate compatible third-party chillers and heat pumps alongside Daikin equipment. The report does not identify compatible models or provide a compatibility list.
What is flow-based sequencing?
It is a control approach that considers hydraulic demand when managing individual units, complementing temperature-based strategies. Daikin says it is suited to systems with variable flow or changing loads.
Has Daikin published energy-savings results for iCM Pro?
The source report says the platform aims to improve efficiency and reduce unnecessary operation, but provides no measured savings or independent performance results.
Source: coolingpost.com
